Posts made in October, 2014

Keep Your Warehouse Clean With These 4 Tips

Keeping your warehouse clean may not seem like a priority when there is work to be done, but an uncluttered, clean space to work in is beneficial to you and your employees. A cleaner warehouse can work more efficiently, and there is a lower risk of accidents, injuries, and sicknesses.

Here are four tips you can use to keep your warehouse looking neat:

4. Create Daily Cleaning Goals

Make a list of the cleaning tasks that should be done every day, such as wiping down equipment and sweeping the work floor. Have employees confirm that each of the tasks has been done before you all leave for the night. That way, you can start each morning with a clean space.

3. Use Color Coding

Sorting items and waste can be something that ends up being overlooked. People are so busy, they are bound to drop bubble wrap in the same receptacle as cardboard boxes sometimes. To make it easier for everyone, color code your waste receptacles so that people can tell immediately what should go where.

2. Empty Trash Multiple Times a Day

In many facilities, the trash is only removed from the warehouse at the end of the day. Often, that leads to overflowing trash bins that spill over onto the ground. Employees can trip and fall because of objects that do not fit into trash receptacles.

To avoid this, it is a good idea to have the trash emptied a number of times a day. You might even consider scheduling those times, so that people expect them and have their trash ready to go. By getting rid of the trash more often, your warehouse will be cleaner and safer.

1. Keep Industrial Cleaning Supplies Stocked

It is especially important to keep industrial cleaning supplies on hand in a warehouse. At any given moment, oil may spill from a forklift, or metal shavings may need to be cleaned up. Leaving messes on the warehouse floor can be dangerous, and not having the proper supplies can delay work and frustrate employees.

When no one is responsible for making sure that there are industrial cleaning supplies in stock, cleaning can be difficult. Either take responsibility for the job, or designate one or two people to regularly take inventory of cleaning supplies and order more when necessary. You may even put up a note board, so that when supplies run low, people can write down what is needed.

Use these tips to make sure that your warehouse is a clean, safe place to work. With a clean warehouse, your business will be able to run more effectively.  

Read More

What You Need To Know About Your Roof Before You Sell

You and your family are ready to move on to bigger and better things, but when you take a look at the roof of your home, you notice all the flaws more now than you ever have. When you are trying to see your home through the eyes of a potential buyer, the roof is one of the first things that you will notice. This is because the roof is one of the main structural components that will make an impression on a buyer.

Simple Roofing Repairs That Must Be Handled

If the roof of your home is in fairly decent shape, but is starting to show signs of its age, you should definitely take the time to attend to any cosmetic issues that are apparent. When you take a look at your roof, look for signs from the ground that would indicate the age of the surface. If you cannot see any roof repair needs from the ground, there is a good chance that a potential buyer will not either. After all, most real estate agents don’t carry a ladder with them to allow buyers access to the roof. Missing shingles, broken or missing patches, and rusted spots on metal roofs are not good signs to someone who initially looks at your property. Most cosmetic roofing repairs can be tackled and solved in just a few short hours. For example, curled and weathered asphalt shingles can simply be tacked back into place with a stapler.

When Replacement May Be Necessary

If you have lived in your home for forty years with the same roof, have to use buckets to catch water when it rains, or have large patches of missing shingles from several past storms, you should probably go ahead and seriously consider a full roof replacement. Severe roof impairments will hinder your ability to sell the house unless you dramatically lower your asking price. Prospective buyers will often ask questions about the age of the roof or if you have any issues. While it is not unheard of, most buyers do not want to invest in a home that needs a new roof; therefore, replacing the roof could help you to sell your home much faster.

If you have a roof that is not as good as it once was, there is a good chance that it will have an affect on how quickly your property will sell. However, you may not be quite prepared to whip out your wallet and pay a roofing contractor for a full on replacement when you are already facing moving expenses, down payments, and a new monthly mortgage with a new home. Talk to a roofing contractor before you list your home to determine just what should be done before you sell and you will most likely see a better outcome once your home is listed.


Read More

4 Tips For Embroidering Your Old T-Shirts

If you’re like most people, you have a lot of t-shirts. You may be wondering whether you should part with a few of them, but before you send those old t-shirts off to the thrift shop bin, consider embroidering them. Here are four tips to help you bring your old t-shirts back to life with embroidery.

Use the Right T-Shirts

The best t-shirts to embroider are typically made from cotton or a cotton blend. You should also seek out t-shirts that feel a little thick; men’s t-shirts are typically thicker and therefore more preferable to embroider, as the material of the t-shirt will hold up better.

Of course, because they’re old t-shirts, you have likely washed and dried them multiple times, which is important so that you don’t need to worry about shrinking and puckering around the edges of the design you choose. Beware of embroidering new t-shirts, as your embroidery may end up looking differently than you want it to.

Choose Designs with a Lot of Open Space

If you’re experienced with embroidery, you may be tempted to choose a complicated, intricate pattern that will take some time to complete. However, you must remember that t-shirts are flexible in movement; simple patterns with open spaces tend to allow the t-shirt to move more naturally when you wear it.

Use a Cutaway Stabilizer

A stabilizer will help to make the t-shirt material more stable for the embroidery you are going to do. Your stitching will adhere better to the surface of the t-shirt when you use the right stabilizer on the inside of the shirt. You may think that any stabilizer will do, but the truth is that the wrong stabilizer can cause problems.

It is important that you use a cutaway stabilizer on your t-shirts, because tearaway stabilizers are paper-like and are scratchy to the touch. Not only that, but they often dissolve in water and can break down because of the needle perforations you do while embroidering your t-shirt. When you use a cutaway stabilizer, on the other hand, it will soften over time and is strong enough to withstand the work that you’re doing on the shirt.

Hoop the Shirt to Get it Right

Using a hoop can be the difference between a sloppy design with lots of puckering and distortion, and a well-placed, well done design. You need to get the area of the shirt you plan to embroider inside the hoop neatly, so you can work on your design without worrying that it won’t look right.

To properly position the shirt in the hoop, first you need to spray the stabilizer with some adhesive, and attach it to the inside of the t-shirt itself. Next, stretch out the t-shirt fabric, and use the two pieces of the hoop as a picture frame. Put one side of the hoop on the inside of the shirt under the stabilizer, and the other piece on top of the stretched out fabric. Then you should have a nice, tight workspace to embroider on.

Now that you’ve got some tips for embroidering your old t-shirts, you can reinvent them by putting new designs on them. Then you can start wearing them again. Consult with specialists, such as Mountain Screen Impressions, Inc., with any further questions.

Read More

You Can Cut The Heating And Air Conditioning Bills Fast

High heating and cooling bills are a problem for many Americans, and you want to get help if your expenses are causing you to struggle financially. You may want to consider making some adjustments around the home to help reduce the financial burdens of making your home comfortable.

An HVAC expert can come to your home to evaluate the efficiency of your appliances, and to see where the air is leaking out of your home. The following updates can help you save money each month on your heating and cooling bills.

New Insulation

Around 46 million homes in America aren’t insulated well enough, and your home could be one of these. You want to talk with an insulation contractor to see if you can have polyurethane spray foam blown throughout the walls, or if you want to have fiberglass insulation added. This stops air loss, and helps with preventing moisture accumulation in the space.

A Programmable Thermostat

Don’t pay to heat and cool your home when you aren’t there. Instead, use a programmable thermostat to control the temperature of the home at all times. This allows you to lock the thermostat, so others in the home can’t turn it up while you are gone, and you can set the temperature lower during the winter when you are away or during the night. In the summer, you can have the air come on shortly before you arrive all day. You should even be able to control the unit from your phone or online.

Duct Sealing

The air your air conditioner pushes into the home, and the heat produced through the furnace may get lost early in its travel throughout the ducts. Up to 30 percent of the air could be lost, and this could be costing you a ton of money. Have an HVAC expert put a sealant around the ducts in the home, and have the ducts checked for damages. Insulation around the ducts will also help.

There are so many ways that you could be losing air around your home, costing you more money to heat and cool your home. Have an HVAC expert see if your windows are leaking air, if the door in the home are a problem, and to see if you can make updates to help make the space more efficient. You may find that the appliances that you have for heating and cooling need to be tuned up, or need to be updated to improve efficient. Check with a company like Glendale Heating & Air Conditioning to see what needs to be done for your house to be more energy efficient.

Read More

Moving Tips For Small Businesses

The good new is, if you are planning to move your small business, there is a good chance that your business has grown in recent years and now requires a large base of operations. The bad news is, moving your business can be a lot of work. Thankfully, with the simple tips below, this often complicated task with business movers can be made much easier.

Insist On Getting An Onsite Quote

When getting an estimate from a moving company, be sure to always insist on getting an onsite quote rather than simply receiving an estimate over the phone or internet. These onsite estimates will allow you to avoid unforeseen charges by ensuring your moving company has an accurate expectation of exactly what you need moved.

Large, heavy, or oddly shaped items can result in additional charges that you were not expecting. As a result, you may find that your move exceeds your budget and leaves you dealing with financial shortcomings for several weeks or even months after your move is over. Insisting on an onsite estimate can help you to avoid this situation and properly budget for your upcoming move.

Consider Using Plastic Storage Totes Rather Than Cardboard Boxes

Using cardboard boxes to pack files, office supplies, and other small objects can be extremely time consuming. Between the need to assemble these boxes and the need to carefully tape each box closed after packing, you can easily spend several weeks packing even the smallest office.

In order to streamline the packing process, you may wish to consider the use of plastic storage boxes rather than cardboard boxes. In many cases, these totes can be rented through your moving company and will be delivered directly to your office once you are ready to begin packing. Since all of the totes will be uniform in size, you will never need to worry about dealing with an unstable stack of boxes. Furthermore, the ability to quickly pack and close each tote can easily save you a lot of time over the course of your move.

Create A Floor Plan Before Moving Day

In order to ensure everything goes smoothly and that you get the most from your professional moving services, you will need to create a floor plan before moving day arrives. This floor plan should clearly assign a color, number, or letter combination to each area in your new office. This identifying code should then be used to mark each piece of furniture and each storage tote or box that will be placed in this area. This will allow your moving crew to easily identify where each item belongs and ensure that all of your belongings are put into their proper place.

Read More
Page 1 of 212

I love Italian Food, I grew up with a mother who would make her own pasta and taught me how to cook correctly. My husband Benjamin on the other hand, loves Mexican. While many would argue that Spanish and Italian are similar when it comes to language, when it comes to food it's a whole different story. I like things that he considers “bland” and he likes things I think should be thrown away. Like any couple we decided to start competing to see who made the best food. Our neighbors have not only taken sides, but have encouraged us to start a restaurant for the indecisive couples. I'm learning all about businesses here and popular solutions to problems.

October 2014
« Sep   Nov »